Qingsheng Knitting logoSock Wholesalers Styles Quote Request a quote
Process · Color

Color matching: from a Pantone reference to a dyed yarn

A color reference is a number; a sock is a dyed cone. Nothing on a monitor predicts what the dye bath does, and nothing in the first order guarantees the second. It covers what actually settles a shade.

On the sample

Color is settled on the dyed sample, not on a screen.

3–5 days

Sampling window, after brief and artwork are confirmed.

Lot ref

The one line that holds a shade across a reorder.

1,000 pairs

Minimum per style, and per color split.

Close view of dyed sock fabric showing an even shade
An even shade is a fiber decision before it is a dye decision. The reference goes in with the brief; the match is made on the sample.

1. The screen is not the sock

Send a hex code and you have sent a description of light emitted from a monitor. A sock is a dyed fiber that reflects light. The two will never be the same object, and a supplier who promises they will be is quoting a screenshot.

This is why color is matched on a dyed sample on this floor: the reference goes in with the brief, and the match is made against yarn, by eye, under a fixed light.

Basis: the dye-matching note in our yarn options guide, which states that the match is made on the sample rather than on a screen.

2. What a lab dip settles, and what it does not

A lab dip is a small dyed piece made to the reference before the bulk yarn is dyed. It answers one question: does this recipe land on this shade on this fiber.

  • It settles whether the shade is achievable on the yarn you chose, and how far off the first attempt is.
  • It settles whether the color survives the knit at that density — a shade can shift visually once it is a rib rather than a flat swatch.
  • It does not settle the bulk to the last digit. Dye lots vary, which is what the lot reference is for.

Basis: the dye-matching note in our yarn options guide, and the 3–5 day sampling window in our wholesale terms.

3. Why the fiber changes the answer

The same reference lands differently on cotton and on polyester. Cotton takes dye into the fiber and reads even, because the fiber length is even. Polyester takes dye by a different route and holds bright and deep shades well, which is why the sublimation and print routes open up on it.

The consequence for a brief

Name the fiber before you argue about the shade. A reference that is right on cotton and wrong on polyester is not a color problem — it is a fiber decision made in the wrong order.

Read the yarn briefing →

Basis: the combed-cotton and polyester rows of the fiber table in our yarn options guide.

4. Holding a shade across a reorder

This is the part buyers learn the hard way. A shade approved in March is not automatically the shade that arrives in September, because the dyed yarn came from a lot, and lots end.

What holds it: the lot is set aside for your order, and a reorder is matched to that same lot. Which means the lot reference has to be written down at the first order — on the specification, next to the composition, not in an email thread nobody can find later.

Skip that line and the reorder is correct on its own sheet while sitting visibly different beside the first shipment — a difference that shows at the shelf, not in the paperwork.

Basis: the yarn-by-lot rule in our yarn options guide.

5. How many colors a style can carry

Color count is the line next to needle count that moves the set-up, and it is the one buyers most often leave out of a brief.

Most studio and sport program run three to six colors per style. Each color is a separate yarn feed on the machine, so a sixth shade is not a sixth design decision: it is a sixth yarn to hold through the whole run.

These are the color counts we quote: three to four on a standard crew, up to six on a jacquard or a striped body, and a knitted-in mark adding its own colors on top of the body count.

What that means for a brief is to state the color count and not only the colors. A specification listing four Pantone references has named four shades, but it has not yet said whether all four sit in the same knit or whether one of them is the cuff.

Basis: the color counts we quote on this floor, and the dye and yarn notes in our yarn options guide.

6. What to put in writing

Four lines on color

  1. The reference as a number, with the system named.
  2. The fiber the reference was chosen against.
  3. The signed sample as the binding color, not the reference itself.
  4. The lot reference, if the shade has to repeat on a reorder.

With those four, a color claim has a document behind it. Without them, it has a photograph.

Back to Custom process · Next: the production calendar

Basis: the specification fields our own sheet records for color, and the sample-as-reference rule in our wholesale terms.

Where these figures come from

  1. Our own yarn options guide — the dye-matching note and the yarn-by-lot rule.
  2. Our own wholesale terms — the 3–5 day sampling window and the 1,000-pair minimum.
  3. Our own glossary — the grammage and cotton entries.

Send the reference and the fiber. We come back with a dyed match.

A reference number, the fiber it was chosen against, and the end use is enough to start. The match comes back on a sample, not on a screen.

Page last updated: November 11, 2026