Sock WholesalersPage last updated: October 27, 2026
Studio-branded grip socks: what the floor holds for a class-based business
A studio buys socks differently from a retailer: the sock has to work on a wooden or a rubber floor, it carries the studio’s name in front of every client, and the reorder has to arrive before the block of classes that needs it. This page covers the construction, the branding and the order arithmetic for that buying shape.
Four styles on this site are listed with a grip or anti-slip sole. Each card below links to the specification sheet of the style in the photograph, so you can compare coverage before you brief a design.
What a studio order has to clear, on the first screen
A studio asks the same question first: can a few hundred pairs be done at all. The answer starts with the bulk line below, and with the sample route that stands under it.
- Order size
- 1,000 pairs per style
- Sample
- 3–5 days
- Bulk lead time
- 20–30 days
- Shipping transit
- 25–40 days
The bulk minimum is 1,000 pairs per style, counted per style and not per order, so a member sock and a teacher sock are two production runs. Below that line the sample route is the standing alternative: a charged physical sample per style, typically 3–5 days after the brief and artwork, with the fee credited against your first bulk order and the courier on you. Mark size and colour count come from your artwork and are settled on the quotation, so the answer to “a few hundred pairs in two colours” is the sample route, not a smaller bulk run.
Six decisions behind a studio sock programme
Sole, shape, brand mark, minimum, sample and reorder — in the order a studio owner usually works through them.
Grip soles, in silicone or dot
Grip dots and silicone prints on the sole are knitted or applied to the sock, with coverage and pattern as a specification line. The anti-skid crew, the slouchy yoga crew, the toddler floor sock and the silicone ballet sock are the four styles this site lists with a grip sole.
Where it applies: Yoga, Pilates, barre, dance, studio training.
You decide: Coverage area, dot or line pattern, and whether the grip runs on the outer sole only or the inner footbed too.
Evidence: a style listed with a silicone grip sole — see the specification sheet for this style.
The crew is the workhorse shape
A crew with a grip sole covers most studio floors: it holds the ankle, it does not slide down in a lunge, and it takes a knitted cuff mark where the studio’s name sits in front of every client in the room.
Where it applies: Class socks, studio retail, teacher kit.
You decide: Cuff height and rib depth, and where the mark sits above the grip.
Evidence: a grip-sole style on this site — see the specification sheet for this style.
Slouch and scrunch shapes for the studio look
Long slouchy scrunch crews and lace-up ballet socks are constructions where the shape of the leg and the cuff do the work rather than the yarn. The length, the slouch and the lace or rib detail are set per style against the sample.
Where it applies: Barre, dance, soft training ranges, studio merchandise.
You decide: The length and how far the cuff slouches when it is worn.
Evidence: the studio-shapes line on this site — see the specification sheet for this style.
What is printed here, and what your own order sets
For a studio, the two lines that matter most are the sole specification and the reorder gap, because a class block cannot run short of the sock the members expect.
Studio sock terms. Published lines are printed on this site; quoted lines are settled per style on your proforma invoice.
| Term | What we publish | How your order sets it | Where it is published |
|---|---|---|---|
| QuotedGrip sole | Grip dots or silicone print on the sole; four styles listed on this site with a grip sole. | Coverage, pattern and inner-footbed coverage are set per style and checked against the approved sample. | Sole field on the specification sheet. |
| QuotedShape and cuff | Crew, knee, slouch and lace-up constructions. | Length, slouch and rib depth are set per style. | Specification sheet, construction. |
| QuotedStudio mark | Logo placement on the rib cuff as the default; body and sole also available. | Mark size, colour count and knit-versus-embroidery come from your artwork. | Logo-placement field on the style sheet. |
| PublishedOrder size | 1,000 pairs per style for bulk orders. | Counted per style, so a member sock and a teacher sock are two runs. | Quote page and every product page. |
| PublishedSample | Typically 3–5 days after the brief and artwork; charged per style, credited against the first bulk order; you cover the courier. | One charged sample per style, trialled before the run is committed. | Quote page, terms card, buyer FAQ. |
| PublishedBulk lead time | Typically 20–30 days after deposit received and sample approved. | Counted from deposit and approval. | Quote page and buyer FAQ. |
| PublishedShipping transit | Approx. 25–40 days sea, 5–10 days air, 3–7 days express. | The leg you choose for the class block that needs it. | Quote page, shipping section. |
| QuotedCosting | No price list is printed on this site. | The binding price sits on the proforma invoice against your specification. | Terms page and quote page. |
The grip sole is the line to press on. Coverage and pattern are a specification, not a picture — ask for the approved sample to be checked on the floor the class actually uses.
The studio mark is knitted into the cuff
A cuff mark is knitted in, so the studio name survives the wash cycles a class sock goes through. Body and sole placements exist as well, but the cuff is the placement our own specification sheets default to.
Where it applies: Studio branding, teacher and member kit.
You decide: Mark size and colour count, and whether it is knitted in or embroidered.
Evidence: the logo-placement field on a style sheet — see the specification sheet for this style.
1,000 pairs per style, counted per style
The bulk minimum is 1,000 pairs per style. A studio that wants a member sock and a teacher sock is buying two styles, and the arithmetic is two runs — worth checking before the design work starts rather than after.
Where it applies: Member socks, teacher kits, studio merchandise.
You decide: One sock for everyone, or separate member and teacher styles.
Evidence: the MOQ line on this site — see the specification sheet for this style.
The sample is what the class tests
A charged physical sample per style arrives typically 3–5 days after the brief and artwork, and the fee is credited against your first bulk order. A studio can put that sample on the floor for a week before committing to the run, which is the smallest test that answers the question.
Where it applies: New constructions, first programmes, seasonal changes.
You decide: Which design the class trials, and who signs it off.
Evidence: the sampling line on this site — see the specification sheet for this style.
Styles from the catalog for this buyer
Both are current listings on this floor, and both are quoted on the terms in the table above. Each card opens the style’s own page.
What these studio programmes look like in practice
No customer names in print. What can be printed is the scale a programme runs at, per style, because that is the number the desk works from when a studio brief arrives.
| Buyer shape | Programme scale we typically see | What it changes in the order |
|---|---|---|
| Multi-site studio group | A 12-studio group, 400 pairs per style for its studio-floor sock | One sock across every site, so the mark, the sole specification and the size split are fixed once and the reorder repeats them. |
| Private label brand | A private label running 6 colourways a season | Six colourways is six artwork approvals and six knit programmes on one construction. |
| E-commerce seller | Sellers running 3–5 styles at a time | Each style is its own run, so the sample round repeats per style rather than once for the account. |
Sizes in that table are per style, counted the way the floor counts a run. A studio programme usually starts from one sock rather than from a range: the group fixes the studio-floor sock first, and a teacher or retail style is a second decision. The bulk line stays where this page prints it, and a per-style size that sits under it is answered with the sample route rather than with a smaller bulk run.
What a studio should not assume
A studio order is usually a member benefit as much as a product. These lines matter for both.
- No order below 1,000 pairs per style. Below that line the sample route is the standing alternative.
- No printed-on grip. Grip is a sole specification checked against the approved sample, not a picture on a page.
- No stock held for you. Production is planned against your order and deposit.
- No customer names in print. The volumes on this page are per-style order sizes and nothing more: a studio programme, its sites and its members are the customer’s to publish, not ours — which is why the figures above are aggregates rather than a named account, and why the sample is the test we offer instead.
- No medical claim. Compression here is a 20–30 mmHg sock, not a medical device.
- No price list. Costing follows specification and quantity onto the invoice.
Grip, minimum and reorders
Can the sole be made for our floor?
The sole is a specification line: coverage area, dot or line pattern, and whether the grip runs on the outer sole only or the inner footbed as well. Four styles on this site are listed with a grip or anti-slip sole, and the approved sample is what the bulk run is checked against.
Can we order a smaller quantity for one studio?
The bulk floor is 1,000 pairs per style, counted per style rather than per order. Under that line the sample route is the standing alternative: a charged physical sample per style, typically 3–5 days after the brief and artwork.
Can we put our studio name on the sock?
Yes, and the cuff is the placement our own sheets default to. Mark size, colour count and whether it is knitted in or embroidered come from the artwork you send with the brief.
Send the floor, the class and the mark
Tell us the surface the class works on, how many pairs a block of classes needs and the studio mark you want on the cuff. The reply comes back within one working day with the construction, the MOQ in writing and the sample route.
Michelle Zhang, Export sales manager, answers enquiries within one working day — sales@sockwholesalers.com, +86-13761030160 (WhatsApp same number).