The adult sock size sheet, printed on one page
This is the adult size sheet we keep at the sample table. One page carries the two grids, the conversion grid on foot length and the letter sizes against men's and women's shoe sizes, the six fields a chart has to state, and six steps for measuring a foot with paper and a pencil. Print it at 100%, band the sample on it, and send the marked copy with your brief.
EU, US men, US women, UK.
Adult foot lengths covered.
Two grids on the paper; the measuring steps stay on screen.
How to print this sheet
Open this page and print it: Ctrl+P on Windows, Cmd+P on a Mac. On the paper you get two grids, the conversion grid and the letter sizes, on one page.
- Paper: A4, portrait. One page.
- Scale: 100%, fit to page off. Scaling down shortens the centimeter band, so a sample reads short on it.
- Headers and footers: off, so the browser's date and address line stay off the grid.
Both grids print whole on that one page; the six fields and the steps stay on screen.
Basis: the size chart explainer, which states the same centimeter basis.
The conversion grid, built on foot length
Every column hangs off foot length in centimeters, measured heel to the tip of the longest toe.
| Size | Foot length | EU | US men | US women | UK |
|---|---|---|---|---|---|
| 21.5–22.5 cm | 34–36 | 4–5.5 | 2–3 | ||
| 22.5–24 cm | 36–38 | 4–5.5 | 6–7.5 | 4–5.5 | |
| 24–26.5 cm | 39–42 | 6–8.5 | 8–10 | 6–8 | |
| 26.5–29 cm | 43–46 | 9–11.5 | 10.5–12 | 9–11 | |
| 29–31 cm | 47–49 | 12–14 | 12–14 | ||
| 31–33 cm | 50–52 | 14.5–16 | 15–16 |
The UK column is the US men column less one size, and each UK band keeps the width of the band it maps from; XS is read on the women's scale, two sizes down. A dash means that band has no figure on that scale: XS has none in the men's column, XL and XXL sit above the women's range.
Basis: the size chart explainer, which publishes the same bands.
From a quoted shoe size to the size we knit
The same grid read the other way: a shoe size from your brief, and the letter it lands in.
| Who it is for | Shoe size quoted | Size we knit |
|---|---|---|
| Men | 4–6 | S |
| Men | 6.5–8.5 | M |
| Men | 9–10.5 | L |
| Men | 11–12.5 | XL |
| Men | 13–14.5 | XXL |
| Women | 3–5 | XS |
| Women | 5.5–7.5 | S |
| Women | 8–10 | M |
| Women | 10.5–12 | L |
A letter is a band, not a point. A women's M and a men's M sit on the same centimeter band and read out on two different shoe scales.
Basis: the size chart explainer, which prints the same bands against each shoe scale.
How to measure a foot with paper and a pencil
Six steps, a hard floor and a rule, late in the day and standing.
- Lay the sheet on a hard floor and stand on it, heel against a wall, so the heel mark starts from an edge you can measure from.
- Weight on both feet, then trace the outline in pencil with the pencil held upright.
- Mark the back of the heel and cross the tip of the longest toe, which is often the second toe.
- Step off, then measure the outline heel to cross with a rule and put down the centimeters.
- Take the same reading on the other foot and keep the larger of the two.
- Write the band the reading falls in, not the reading itself, so a customer can reorder by name.
Two more numbers are worth a line: the width across the ball, and the ankle circumference above the bone. Both change how a rib cuff sits.
Basis: the kids' size chart guide, which runs the same measurement on growing feet.
The six fields a size chart has to state
These six can be quoted, sampled and re-ordered without a second round of questions.
| Field | What to write | What it sets |
|---|---|---|
| Size label | The letters or numbers you sell | What is printed on sock and pack |
| Foot length | Low to high, in centimeters | The cylinder and stitch count |
| Garment length | Heel to cuff, in centimeters | The knit length |
| Cuff diameter | Relaxed, in centimeters | Cuff tension and yarn |
| Heel position | Where the heel sits on the foot | The reciprocated heel |
| Size split | Pairs per size per carton | Picking and packing |
Fill the six once and they carry forward through every reorder.
Basis: the size chart explainer, which gives the reason for each field.
Print it, band it, then knit to your grid
The printed grid is a starting point. Lay the sample flat on the page, line the heel up with the low end of the band, and mark where the toe lands.
Match the band against your market's own standard, then we knit the sample to your grid. Where the two differ, your standard goes on the sample card.
Send the marked copy through the enquiry form. The same band is what the inspection sheet checks foot length against, at the first pairs off the machine and again mid run.
Basis: the size chart explainer, the buyer-facing version of this sheet.
Where these figures come from
- Our own size chart explainer — the bands, the four columns and the six fields.
- Our own kids' size chart guide — the same measurement below adult sizes.
- Our own MOQ and size split FAQ — how an order splits across sizes.
- Our own inspection checklist sheet — the checks after a size confirmation.
Send the grid your market uses
Print the sheet, write your market's bands on it, and send it with the brief. The desk answers within one working day.
Minimum order is 1,000 pairs per style.
Sock Wholesalers